YOU ARE BUYING A PROFESSIONALLY TESTED AND CHECKED OUT AS FULLY FUNCTIONAL, HP AGILENT 8592A 26 GHz SPECTRUM ANALYZER WITH OPT 023! Option 023 is RS-232C Interface on back. It was just calibrated. The Due date is 02/16/18. The unit is in good to great cosmetic condition. It may have a small scratch here or there. It has some small black marks on the top cover. All buttons, knobs, and switches are good and intact. The serial # is 2805A00501. Will works with 120 & 240 voltage. We always re-check the item before we ship it. This makes sure the item is working, when it leaves my shop.
THE SPECTRUM ANALYZER WILL READ TO 26 GHz WITH INPUT 0.0 dBm , AND THE READING IS -11.41 dBm. AT 22 GHz WITH THE INPUT 0.0 dBm AND THE READING IS -.96 dBm. THE MANUAL'S SPEC FOR 22 GHz is + or - <5.0 dBm. AT 25 GHz WITH 0.0 dBm AND THE READING IS -5.05 dBm. IT IS WITHIN 22 GHz SPECS. THERE IS NO OPTION FOR INCREASE GHz AFTER 22 GHz AND NO SPECS AFTER 22 GHz.
WE WILL RE-CALIBRATED THE UNIT BEFORE SHIPPING AND A NIST TRACEABLE CALIBRATION CERTIFICATE, WILL BE PROVIDED AFTER ITEM IS RECEIVED AND IS ACCEPTED AS WORKING WITH IN SPECS. WE WILL MAIL OUT THE CERTIFICATE. THE RE-CALIBRATION DELAYS THE SHIPPING TIME THREE (3) DAYS.
RE-CALIBRATION MEANS, WHEN YOU BUY THE EQUIPMENT, IT WILL BE FULLY TESTED FROM THE LOWEST TO HIGHEST FREQUENCY, dB MEASUREMENTS, ALL FUNCTIONS, AND ALL SETTINGS. NIST STANDARDS ARE USED TO CHECK THE EQUIPMENT READINGS. IT IS WITHIN THE MANUFACTURER’S SPECIFICATIONS FOR THIS PIECE OF EQUIPMENT.
The Keysight Agilent HP 8592A Spectrum Analyzer is a light weight, compact and easy to use portable analyzer ideally suited for field or bench use. 4 control setup, everything else is automatic. It has built in pre-selector and comb filters. Over 100 different functions are programmable over three different interfaces, allowing you to use a wide variety of computers.
FEATURES: *** 50kHz to 25.0 GHz *** Resolution of 1kHz to 3MHz in 1, 3 sequence. *** Input amplitude range is: - 109 dBm to + 30 dBm. *** Store and recall different control settings and trace displays *** Programmable via RS232C ON BACK. *** Frequency accuracy is ± 2.7MHz at 22GHz *** Displayed average noise is less than - 88 dBm. *** Built-in frequency counter N(f) input connector 50 ohm input impedance *** Phase noise of -105 dBc/Hz at 30 kHz offset *** Operate remotely and print directly with the optional interfaces 4 control setup, everything else is automatic .
For more information and Specs: http://www.miccotech.com/Agilent-8592A.html
I HAVE THE HP AGILENT 8562A, HP AGILENT 8563E, HP AGILENT 8566B, HP AGILENT 8591A, AND TEKTRONIX 492P SPECTRUM ANALYZER ON DIFFERENT EBAY SALES. TAKE A LOOK AND SEE IF YOU NEED ANYTHING ELSE!
Reasonable offers are always welcome! REASONABLE ONES!
You get the HP Agilent 8592A Spectrum analyzer, Manuals on CD, and Power cord. NO more. Again, it was tested and works fine! GET THIS GREAT WORKING CALIBRATED, HP AGILENT 8592A 26 GHz SPECTRUM ANALYZER WITH OPT 023 TODAY! Buy from an experienced seller. Buy with confidence as feedback speaks for itself. Buyer pays $60.00 shipping in 48 states with insurance. We will bubble wrap great and put in a double wall box for safe shipping.
WE DO SHIP OVERSEAS!